Do you remember the common problems and solutions that wire drawing machine manufacturers have shown you before? Today we will continue to talk about the maintenance and upkeep of the straight wire drawing machine.
Straight wire drawing machine is a common type of metal wire processing equipment. It can stretch high, medium, and low-carbon steel wires, stainless steel wires, copper wires, alloy copper wires, aluminum alloy wires, etc. Accurate meter measurement with an error of 0.1%; Fixed length automatic deceleration and parking; Broken line detection and automatic parking; Arbitrary drum forward and backward movement and left and right linkage; Display of various fault information and handling information; Various sports information monitoring. And it supports any mold matching process, with automatic compensation through tuning after mold wear, making it less prone to wire breakage. And it is equipped with a jumper device that can cut and pull the drum freely to adapt to different processes. Remote control and diagnosis can be implemented based on industrial Ethernet according to user needs.
1. Daily maintenance
(1) The equipment should be cleaned and undergo necessary inspections after each use.
(2) Inspect and adjust the sand belt, and perform daily lubrication work on the equipment.
2. Weekly maintenance: In addition to daily maintenance, it is also necessary to inspect the conveyor belt to ensure its proper tension.
The metal wire drawn by the straight wire drawing machine can be applied to hot-dip galvanized welded wire mesh. After hot-dip galvanizing treatment, the service life of the welded wire mesh is quite long, and the hot-dip galvanized welded wire mesh has a very good crack prevention effect in the construction industry.
The above is today's content. If you are interested, you can follow and consult the wire drawing machine manufacturer. If you want to know more related content, you can follow and consult us.